-
輸入電壓：12 VDC
-
顯示屏:3.2英寸
-
分辨率:480×800像素,全彩顯示,全視角80°
-
接口:1個SKK28連接器（用于鄰接總線連接）
-
1個光纖接口 SC單模 9/125μm OS2
-
材質:塑料外殼,不銹鋼面板
-
防護等級:IP68
-
Input Voltage: 12 VDC
-
Display Screen: 3.2 inches
-
Resolution: 480×800 pixels, full-color display, 80° full viewing angle
-
Interfaces: 1×SKK28 connector (for adjacent bus connection)
-
1×fiber optic interface (SC single-mode, 9/125μm OS2)
-
Material: Plastic housing, stainless steel panel
-
Protection Grade: IP68
設計
光纖轉換器搭載于高強度塑料外殼，配套不銹鋼保護蓋。通過 SKK28 連接器與工作面控制單元 EC-1 實現連接，通過光纖電纜與地面端或防爆型計算機建立連接。
功能
本設備用于將 DRD 支架控制系統與其他子系統或 DRD 可視化系統進行互聯，配套操作鍵盤實現便捷裝機。IP 地址等所有核心參數均可在本設備上直接設置。其核心功能為將支架內部的四線以太網接口轉換為光纖接口，實現工作面數據的遠距離實時傳輸。
Design
The fiber optic converter is housed in a high-strength plastic casing with a matching stainless steel protective cover. It connects to the working face control unit EC-1 via the SKK28 connector, and establishes a connection with the ground terminal or explosion-proof computer through fiber optic cables.
Functions
This device is used for interconnection between the DRD support control system and other subsystems or the DRD visualization system, and is equipped with an operation keyboard for convenient installation. All core parameters such as IP address can be directly set on the device. Its core function is to convert the four-wire Ethernet interface inside the support into a fiber optic interface, enabling long-distance real-time transmission of working face data.
